Stock List

Ref.No. Machine Name Year Specifications  
MT-107 "FUJI" Model GF2453A DC Motor (250 Kw) 1988 440V, 850-1700rpm, 6 pole -
MT-109 "SUMITOMO" Type CD506C DC Motor (75 Kw) 1990 440V, 650-1850rpm -
MT-111 "YASKAWA" Type GBDR-K DC Motor (37 Kw) 1994 220V, 206-217A, 400-1600rpm -
MT-112 "YASKAWA" Type GBDR-K DC Motor (150 Kw) 1986 220V, 580-1750rpm -
MT-128 "YASKAWA" Type SGMBH-2BDCA61 AC Servo Motor 2004 400V, 1500rpm -
MT-133/134/147 "HITACHI" Type TFOA 3-Phase Induction Motor (37 Kw) (3 Units) 2001 4 Pole, 200V (50/60Hz, 140/70A, 1460rpm) / 400V (50/60Hz, 70/66A, 1460/1750rpm) -
MT-135/136/137/138 "TOSHIBA" Type IKK 3-Phase Induction Motor (5.5 Kw) (4 Units) 2000 400V, 50/60Hz, 2880/3460rpm, 2 Pole -
MT-139/140/141/142 "HITACHI" Type TFOA 3-Phase Induction Motor (18.5Kw) (4 Units) 2001 400V, 50/60Hz, 2920-3500rpm, 2 Pole -
MT-145/146 "HITACHI" Type TFOA 3-Phase Induction Motor (45 Kw) (2 Units) 2001 400V, 50Hz, 2930rpm, 2 Pole -
CM-11 "AMADA" Model CM-400 Circular Sawing Machine 1981 200/220V, 3-Phase, 50/60Hz, Saw Motor: 2.2Kw -
CM-15 "MORY" Model PCG-140 Pipe Threading Machine 1983 Cutting Capacity: φ60-140mm (O.D.), Thickness: 15mm (Max.) -
CM-21 "MORY" Model PCJ-180 Pipe Threading Machine 1985 Auto, 100-180mmφ (O.D.), Thickness: 10mm (Max.), Length: 100-500mm, Disk-Cut -
CM-28 "MORY" Model PCPW-65 Pipe Threading Machine 1982 Cutting Capacity: 10-60.5mm (O.D.), Thickness: 5mm (Max.), Length: (Standard) 5-350mm / (L-Bed Use) 1500mm(Max.), 270-800rpm -
CM-29/30 "MORY" Model PCP-65N2 Pipe Threading Machine (2 Units) 1985 Cutting Capacity: 10-60.5mm (O.D.), Thickness: 5mm (Max.), Length: (Standard) 5-350mm / (L-Bed Use) 1500mm(Max.), 270-800rpm (Inverter) -
CM-34 "TSUNE" Model TK-70-PL High-Speed Cutting Machine 1998 Cutting Capacity: φ10-70mm (O.D.), Length: 1.6-6.0mm, Auto Cutting Length: 200mm (Max.) -
CM-84 "MORI" Model FBS-40DA Automatic Cutter 1985 Cutting Capacity: 32mm (Round-Bar Steel), S: 50 -
TT-5 "AMADA" Model V-300 Contour Machine 1991 200V, 3-Phase, 50/60Hz, Saw Motor: 0.75Kw (x 4 Pole) -
PL-5 "L-TEC" Type PCM-150 Plasma Welding and Cutting Machine 1992 Input: 200V-134A, Output: 37000 OCV(Max.), 12000V-150A -
PL-40 "KOIKE SANSO" Model VERTEX-5500 NS-1835 CNC Plasma Angle Cutting Machine 1997 Rail Span: 1700mm, Cutting Range (X/Y/Z): 22000mm/ 500mm/ 200mm, Cutting Thickness: 7-25mm -
PL-42 "KOIKE SANSO" Model UNITEX-4000D Water-Injection Plasma Cutting Machine 1991 Cutting Range: 2500-6300mm, Torch Stroke: 150mm, Cutting Thickness: 3-50mm, Material: SUS, NC: FANUC-11M-F -
12 >